Product Details:
Brand | Cheonsei Korea |
Pump Type | Metering pump |
Usage/Application | Industrial |
Head | 60 |
Model Name/Number | KD seris |
Material | SS |
Nominal model of control motor | K-4 |
---|---|
Model of control motor | MCH-1C |
Manual setting devices | Equipped |
Type of servo motor | Reversible condenser motor with brake |
Voltage, Frequency | AC 100V, 50/60Hz |
Output | 8W |
Rated revolution | 1,450rpm (60Hz), 1,200rpm (50Hz) |
Feed-back resistance | 200 ohms 1.5W |
Operating time | 49 sec (60Hz), 58 sec (50Hz) |
Operating angle | 0 to 300 degrees |
Ambient temperature | -20 to +60 degrees C |
Protections | Outdoor drip-proof |
Color | Munsell 7B 2.5/7 |
Weight | 5kg |
Product Details:
Minimum Order Quantity | 1 Piece |
Max Flow Rate | 1001-1500m3/hr |
Motor Horsepower | 2 HP |
Motor Phase | Three Phase |
Media | Liquid |
Brand | Tacmina Japan |
Example of performance specifications
Please contact us for details of customized specications.
Tank CapacityA : 50L
B : 15LPump feed volumeA : Up to 12L/min
B : Up to 360mL/minPump feed pressureA : Up to 0.4MPa
B : Up to 1.0MPaMix ratio range1:4 to 1:330Treated volume12.36L/minWeightApprox. 550kgExternal dimensions (mm)W2350 × H1900 × D1000
Product Details:
Usage/Application | Chemical Dosing |
Head | 1000mtr |
Model Name/Number | KH series |
Material | SS |
Phase | single and Three |
Color | Blue |
Capacity | 155m3/hr |
Product Details:
Max Flow Rate(Litre/Hr) | 100 LPH |
Max Flow Rate | 30 LPH |
Usage/Application | Industrial |
Head | 1200 |
Model Name/Number | VD,KD,VM series |
Material | PVDF and SS |
Phase | single and three |
Color | Blue |
Product Details:
Flow Rate | 200 LPH |
Max Flow Rate(Litre/Hr) | 1000 LPH |
Pressure Range | 40 Bar |
Usage/Application | Water Treatment |
Head | 12000 |
Model Name/Number | KP series |
Material | SS,PVDF |
Phase | 1 pgase ,3 Phase |
Color | Blue |
Product Details:
Usage/Application | Chemical Dosing |
Type of Pump | Solenoid Metering pump |
Automation Grade | Automatic |
Pump Type | Dosing Pump |
Power Source | Electric |
Material | Plastic |
Voltage | 230 volt ac |
Product Details:
Flow Rate | 10 LPM |
Motor Horsepower | 1HP |
Power Source | AC Powered |
Automation Grade | Automatic |
Pressure | 15 Bar |
Set Contains | full pump with cable |
Power | 220 volt |
|
|||||||||||||||||||||
|
Product Details:
Material | PP,PVDF,SS,CAST |
IP Rating | IP65 |
Automation Grade | Automatic |
Suction Tubing | PP |
Valve Ball | YES |
Nominal model of control motor | K-4 |
---|---|
Model of control motor | MCH-1C |
Manual setting devices | Equipped |
Type of servo motor | Reversible condenser motor with brake |
Voltage, Frequency | AC 100V, 50/60Hz |
Output | 8W |
Rated revolution | 1,450rpm (60Hz), 1,200rpm (50Hz) |
Feed-back resistance | 200 ohms 1.5W |
Operating time | 49 sec (60Hz), 58 sec (50Hz) |
Operating angle | 0 to 300 degrees |
Ambient temperature | -20 to +60 degrees C |
Protections | Outdoor drip-proof |
Color | Munsell 7B 2.5/7 |
Weight | 5kg |
Product Details:
Max Flow Rate | upto 10 LPM |
Power Source | Electric |
Phase | Single Phase |
Pump Type | Solenoid Dosing Pump |
Material | PVDF,PP,PVC |
Color | Blue,Yellow |
Voltage | 220 |
Discharge Pressure | 2 to 4 bar |
Usage/Application | Chemical dosing |
Media | Liquid |
Product Details:
Material | PVDF,PP |
Usage | Chemical Dosing |
Surface Finish | Standard |
IP Rating | IP65 |
Head | 5 mtr |
Automation Grade | Automatic |
Phase | single |
Product Details:
Usage/Application | Industrial |
Head | 6 to 10 mtr |
Model Name/Number | KH series |
Material | Cast iron ,SS,PP,PVDF |
Phase | 3 pgase |
Color | Blue |
Capacity | 40 lpm |
Nominal model of control motor | K-4 |
---|---|
Model of control motor | MCH-1C |
Manual setting devices | Equipped |
Type of servo motor | Reversible condenser motor with brake |
Voltage, Frequency | AC 100V, 50/60Hz |
Output | 8W |
Rated revolution | 1,450rpm (60Hz), 1,200rpm (50Hz) |
Feed-back resistance | 200 ohms 1.5W |
Operating time | 49 sec (60Hz), 58 sec (50Hz) |
Operating angle | 0 to 300 degrees |
Ambient temperature | -20 to +60 degrees C |
Protections | Outdoor drip-proof |
Color | Munsell 7B 2.5/7 |
Weight | 5kg |
Product Details:
Max Flow Rate | 5 LPH |
Capacity | 1000 LPH |
Usage/Application | Chemical Dosing |
Type of Pump | Plunger |
Automation Grade | Manual |
Model Name/Number | AX series |
Brand | Cheonsei Korea |
Nominal model of control motor | K-4 |
---|---|
Model of control motor | MCH-1C |
Manual setting devices | Equipped |
Type of servo motor | Reversible condenser motor with brake |
Voltage, Frequency | AC 100V, 50/60Hz |
Output | 8W |
Rated revolution | 1,450rpm (60Hz), 1,200rpm (50Hz) |
Feed-back resistance | 200 ohms 1.5W |
Operating time | 49 sec (60Hz), 58 sec (50Hz) |
Operating angle | 0 to 300 degrees |
Ambient temperature | -20 to +60 degrees C |
Protections | Outdoor drip-proof |
Color | Munsell 7B 2.5/7 |
Weight | 5kg |
Product Details:
Max Flow Rate | 1500 LMP |
Motor Horsepower | 2 HP |
Stages | Single Stage |
Motor Phase | Single Phase |
Application/Usage | For Water Treatment Plants |
Brand | TACMINA JAPAN |
Material | SS |
Motor Speed Rpm | 1400 |
Product Details:
Number of Liquid Bottles | 4 |
Featured Character Design | customized |
Color | Black |
Product Code | 3BA7210 |
Brand | Airtech USA |
Packaging Type | Wooden case |
Warranty Period | 12 months |
Weight | 120kg |
Airtech is a leading manufacturer of regenerative blowers. High pressure regenerative blowers manufactured by Airtech make up the 3BA series regenerative vacuum/pressure blowers. Our regenerative blowers are an ideal alternative to standard rotary vane pumps and PD/rotary lobe blowers. It’s innovative light weight and compact design adds to the ease of operation. 3BA regenerative blowers can quickly be added to your system with its easy to install close-coupled construction. The cool running outboard bearings increase service life. Free is a word that everyone likes to see when they are looking at a product, and this one is OIL FREE, MAINTENANCE FREE, and operates at an industry low dB(A) sound level. The 3BA has an operating capacity range of up to 1500 CFM and can achieve an end vacuum up to 20″ Hg or a pressure of 13 PSIG.
Product Details:
Phase | Air Operated diapghram pump |
Pump Type | AODD |
Material | CAT Iron |
Motor Horsepower | 0.3 to 5 HP |
Head | 5 mts |
Color | Blue,Silver,Transperant |
Plus Series metallic casing diaphragm pumps are our premium segment pumps. While all the sections of the pump that come into contact with the fluid are made of metal, parts such as Air Inlet Cap, Pilot valve repair kit, Bottom bracket, Inner caps, Air valve repair kit and Muffler are also made of metal to ensure high strength. In addition, the metallic muffler decreases the noise level of the pump significantly more than conventional mufflers to meet occupational safety standards at the workplace.
Product Details:
Model Name/Number | PA-6300 |
Power | 0.37 to 7.5 kw |
Material | PVDF ,Plastic |
Head | 5 mtr |
Capacity | 05. to 60lpm |
Pressure | 12 bar |
Speed | 3000 rpm |
Plus Series metallic casing diaphragm pumps are our premium segment pumps. While all the sections of the pump that come into contact with the fluid are made of metal, parts such as Air Inlet Cap, Pilot valve repair kit, Bottom bracket, Inner caps, Air valve repair kit and Muffler are also made of metal to ensure high strength. In addition, the metallic muffler decreases the noise level of the pump significantly more than conventional mufflers to meet occupational safety standards at the workplace.
Product Details:
Maximum Flow Rate | 200LPM |
Power Source | Pneumatic |
Pump Type | Air Operated Diapghram pump |
Material | Polyproplene, PVDF |
Motor Horsepower | 16 lpm |
Head | 8 mtr |
Color | White |
Connection Inlet-Outlet:
Connection Inlet-Outlet: 1/4``-1/2’’
Connection Type: BSP
Capacity Range: 0 - 16 lpm
Pump Head: 0-84 mwc
Max. Suction Lift: 6 - 8 m
Max. Solid Particle Size: 1 mm
Pump Casing Materials: Polyproplene, PVDF(Kynar)
Pump Inner Materials: Neoprene, Buna-n, PTFE, FKM, Santopren, EPDM
Air Connection: 1/4"
Max. Operating Air Pressure: 0-8,4 bar
Air Consumption: 1,8 - 10 m3/h
Product Details:
Max Flow Rate | 20 LPM |
Power Source | Air Operated |
Pump Type | AODD |
Material | Stailess steel |
Head | 6 to 8 mtr |
Color | Silver |
Maximum Discharge Flow | 0-84 mwc |
Discharge Pressure | 0 to 8 bar |
Usage/Application | food ,pharmaceutical industries |
Connection Inlet-Outlet: 1’’ (25mm)
Connection Type: Tri-Clamp
Capacity Range: 0-160 lpm
Pump Head: 0-84 mwc
Max. Suction Lift: 6-8 m
Max. Solid Particle Size: 4 mm
Pump Casing Materials: 316L Stainless Steel
Pump Inner Materials: PTFE, Santoprene, EPDM
Air Connection: 1/2"
Max. Operating Air Pressure: 0-8,4 bar
Air Consumption: 10- 67 m3/h
Product Details:
Max Flow Rate | 50 LPM |
Power Source | Air Operated |
Pump Type | AODD |
Material | Aluminum, Cast Iron, Stainless Steel (316) |
Head | 0-168 mwc |
Color | Black |
Maximum Discharge Flow | 0 to 80 lpm |
Discharge Pressure | 8 bar |
Usage/Application | Air Consumption: 10- 67 m3/h |
Connection Inlet-Outlet: 1’’
Connection Type: BSP (Tapered)
Capacity Range: 0-80 lpm
Pump Head: 0-168 mwc
Max. Suction Lift: 6-8 m
Max. Solid Particle Size: 4 mm
Pump Casing Materials: Aluminum, Cast Iron, Stainless Steel (316)
Pump Inner Materials: Neoprene, Buna-n, FKM, Santoprene, EPDM
Air Connection: 1/2"
Max. Operating Air Pressure: 0-8,4 bar
Air Consumption: 10- 67 m3/h
Product Details:
Power Source | Electric |
Phase | Single Phase |
Pump Type | Diapgram pump |
Material | Aluminum, Polypropylene, PVDF, Stainless Steel |
Motor Horsepower | 1.1 to 3 kw |
Head | 50 mwc |
Color | Silver |
Maximum Discharge Flow | 15 m3/h |
Warranty | 12 months |
Sound Level | 70dbA |
Part No. | DP20E |
Connection Inlet-Outlet: 1’’
Capacity Range: 4,5 m3/h
Max. Suction Lift: 6-8 m
Max. Solid Particle Size: 6 mm
Pump Head: 50 mwc
Motor Power: 1,1 kW
Pump Casing Materials: Aluminum, Polypropylene, PVDF, Stainless Steel
Pump Inner Materials: Neoprene, Santoprene,Teflon,FKM,EPDM,BUNA-N
Product Details:
Pressure Range | 40 Bar |
Usage/Application | Industrial |
Brand | DIAPUMP TURKEY |
Material | Neoprene, Buna-n, FKM, Santoprene, EPDM |
Head | 0-84 mwc |
Motor Phase | Pneumatic |
onnection Inlet-Outlet: 1½’’
Connection Type: BSP (Tapered)
Capacity Range: 0-400 lpm
Pump Head: 0-84 mwc
Max. Suction Lift: 6-8 m
Max. Solid Particle Size: 6 mm
Pump Casing Materials: Aluminum
Pump Inner Materials: Neoprene, Buna-n, FKM, Santoprene, EPDM
Air Connection: 3/4"
Max. Operating Air Pressure: 0-8,4 bar
Air Consumption: 16- 85 m3/h
Product Details:
Pump Type | Air operated diagphram pump |
Material | PVDF,PVC,PP,SS |
Head | 6 to8 mtr |
Color | Balck,Red,Silver |
Discharge Pressure | 8 bar |
Usage/Application | Industries |
Connection Inlet-Outlet: 2’
Connection Type: BSP (Tapered)
Capacity Range: 0-565 lpm
Pump Head: 0-84 mwc
Max. Suction Lift: 6-8 m
Max. Solid Particle Size: 9 mm
Pump Casing Materials: Aluminum
Pump Inner Materials: Neoprene, Buna-n, FKM, Santoprene, EPDM
Air Connection: 3/4"
Max. Operating Air Pressure: 0-8,4 bar
Air Consumption: 33- 169 m3/h
Product Details:
Max Flow Rate(Litre/Hr) | 5 LPH |
Ratings at Max back pressure I H | 1 bar |
Ratings at Max back pressure Bar | 4.5 bar |
Max Pressure | 4 bar |
Electronic | Dosing Pump |
Solenoind | Dosing pump |